zmkfirmware · petejohanson · Nov 28, 2023 · Sep 13, 2022 · Sep 13, 2022 · Jan 27, 2023
diff --git a/app/boards/arm/adv360pro/Kconfig b/app/boards/arm/adv360pro/Kconfig
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: MIT
+
+config BOARD_ENABLE_DCDC
+ bool "Enable DCDC mode"
+ select SOC_DCDC_NRF52X
+ default y
+ depends on BOARD_ADV360PRO_LEFT || BOARD_ADV360PRO_RIGHT
diff --git a/app/boards/arm/adv360pro/Kconfig.board b/app/boards/arm/adv360pro/Kconfig.board
@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2022 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+config BOARD_ADV360PRO_LEFT
+ bool "adv360pro_left"
+ depends on SOC_NRF52840_QIAA
+
+config BOARD_ADV360PRO_RIGHT
+ bool "adv360pro_right"
+ depends on SOC_NRF52840_QIAA
diff --git a/app/boards/arm/adv360pro/Kconfig.defconfig b/app/boards/arm/adv360pro/Kconfig.defconfig
@@ -0,0 +1,58 @@
+#
+# Copyright (c) 2022 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+#
+
+if BOARD_ADV360PRO_LEFT
+
+ config ZMK_KEYBOARD_NAME
+ default "Adv360 Pro"
+
+ config ZMK_SPLIT_ROLE_CENTRAL
+ default y
+
+
+endif # BOARD_ADV360PRO_LEFT
+
+if BOARD_ADV360PRO_RIGHT
+
+ config ZMK_KEYBOARD_NAME
+ default "Adv360 Pro rt"
+
+endif # BOARD_ADV360PRO_RIGHT
+
+
+if BOARD_ADV360PRO_LEFT || BOARD_ADV360PRO_RIGHT
+
+config BOARD
+ default "adv360pro"
+
+config ZMK_SPLIT
+ default y
+
+config SPI
+ bool
+ default y
+
+config BT_CTLR
+ default BT
+
+if USB
+
+config USB_NRFX
+ default y
+
+config USB_DEVICE_STACK
+ default y
+
+endif # USB
+
+config ZMK_BATTERY_VOLTAGE_DIVIDER
+ default y
+
+config SPI
+ default y
+
+
+
+endif # BOARD_ADV360PRO_LEFT || BOARD_ADV360PRO_RIGHT
diff --git a/app/boards/arm/adv360pro/adv360pro.dtsi b/app/boards/arm/adv360pro/adv360pro.dtsi
@@ -0,0 +1,163 @@
+/*
+*
+* Copyright (c) 2021 Polarity Works
+* SPDX-License-Identifier: MIT
+*
+*/
+
+/dts-v1/;
+#include <nordic/nrf52840_qiaa.dtsi>
+
+#include <dt-bindings/led/led.h>
+#include <dt-bindings/zmk/matrix_transform.h>
+
+#include "adv360pro_pinctrl.dtsi"
+
+/ {
+ model = "Adv360";
+ compatible = "kinesis,adv360pro";
+
+ chosen {
+ zephyr,code-partition = &code_partition;
+ zephyr,sram = &sram0;
+ zephyr,flash = &flash0;
+ zmk,kscan = &kscan0;
+ zmk,backlight = &backlight;
+ zmk,battery = &vbatt;
+ zmk,matrix_transform = &default_transform;
+ zmk,underglow = &led_strip;
+ };
+
+ default_transform: keymap_transform_0 {
+ compatible = "zmk,matrix-transform";
+ columns = <20>;
+ rows = <5>;
+
+
+ map = <
+ RC(4,0) RC(4,1) RC(4,2) RC(4,3) RC(4,4) RC(4,5) RC(4,6) RC(4,13) RC(4,14) RC(4,15) RC(4,16) RC(4,17) RC(4,18) RC(4,19)
+ RC(3,0) RC(3,1) RC(3,2) RC(3,3) RC(3,4) RC(3,5) RC(3,6) RC(3,13) RC(3,14) RC(3,15) RC(3,16) RC(3,17) RC(3,18) RC(3,19)
+ RC(2,0) RC(2,1) RC(2,2) RC(2,3) RC(2,4) RC(2,5) RC(2,6) RC(2,8) RC(2,9) RC(2,10) RC(2,11) RC(2,13) RC(2,14) RC(2,15) RC(2,16) RC(2,17) RC(2,18) RC(2,19)
+ RC(1,0) RC(1,1) RC(1,2) RC(1,3) RC(1,4) RC(1,5) RC(1,9) RC(1,10) RC(1,14) RC(1,15) RC(1,16) RC(1,17) RC(1,18) RC(1,19)
+ RC(0,0) RC(0,1) RC(0,2) RC(0,3) RC(0,4) RC(0,7) RC(0,8) RC(0,9) RC(0,10) RC(0,11) RC(0,12) RC(0,15) RC(0,16) RC(0,17) RC(0,18) RC(0,19)
+
+ >;
+ };
+ ext-power {
+ compatible = "zmk,ext-power-generic";
+ label = "EXT_POWER";
+ control-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ vbatt: vbatt {
+ compatible = "zmk,battery-voltage-divider";
+ io-channels = <&adc 2>;
+ output-ohms = <100000>;
+ full-ohms = <(100000 + 100000)>;
+ };
+
+ backlight: pwmleds {
+ compatible = "pwm-leds";
+ pwm_led_0 {
+ pwms = <&pwm0 0 10000 PWM_POLARITY_NORMAL>;
+ };
+ };
+
+};
+
+&pwm0 {
+ status = "okay";
+ pinctrl-0 = <&pwm0_default>;
+ pinctrl-1 = <&pwm0_sleep>;
+ pinctrl-names = "default", "sleep";
+};
+
+&adc {
+ status = "okay";
+};
+
+&gpiote {
+ status = "okay";
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&usbd {
+ status = "okay";
+};
+
+&flash0 {
+ /*
+ * For more information, see:
+ * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html
+ */
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sd_partition: partition@0 {
+ label = "softdevice";
+ reg = <0x00000000 0x00026000>;
+ };
+ code_partition: partition@26000 {
+ label = "code_partition";
+ reg = <0x00026000 0x000c6000>;
+ };
+
+ /*
+ * The flash starting at 0x000ec000 and ending at
+ * 0x000f3fff is reserved for use by the application.
+ */
+
+ /*
+ * Storage partition will be used by FCB/LittleFS/NVS
+ * if enabled.
+ */
+ storage_partition: partition@ec000 {
+ label = "storage";
+ reg = <0x000ec000 0x00008000>;
+ };
+
+ boot_partition: partition@f4000 {
+ label = "adafruit_boot";
+ reg = <0x000f4000 0x0000c000>;
+ };
+ };
+};
+
+&usbd {
+ status = "okay";
+};
+
+&spi3 {
+ compatible = "nordic,nrf-spim";
+ status = "okay";
+ pinctrl-0 = <&spi3_default>;
+ pinctrl-1 = <&spi3_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ led_strip: ws2812@0 {
+ compatible = "worldsemi,ws2812-spi";
+ label = "WS2812";
+
+ /* SPI */
+ reg = <0>;
+ spi-max-frequency = <4000000>;
+
+ /* WS2812 */
+ chain-length = <3>; /* number of LEDs */
+ spi-one-frame = <0x70>;
+ spi-zero-frame = <0x40>;
+
+ color-mapping = <LED_COLOR_ID_GREEN
+ LED_COLOR_ID_RED
+ LED_COLOR_ID_BLUE>;
+ };
+};
diff --git a/app/boards/arm/adv360pro/adv360pro.keymap b/app/boards/arm/adv360pro/adv360pro.keymap
@@ -0,0 +1,52 @@
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+#include <dt-bindings/zmk/rgb.h>
+#include <dt-bindings/zmk/backlight.h>
+
+/ {
+ behaviors {
+ #include "macros.dtsi"
+ };
+
+ keymap {
+ compatible = "zmk,keymap";
+
+ default_layer {
+ bindings = <
+ &kp EQUAL &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &tog 1 &mo 3 &kp N6 &kp N7 &kp N8 &kp N9 &kp N0 &kp MINUS
+ &kp TAB &kp Q &kp W &kp E &kp R &kp T &none &none &kp Y &kp U &kp I &kp O &kp P &kp BSLH
+ &kp ESC &kp A &kp S &kp D &kp F &kp G &none &kp LCTRL &kp LALT &kp LGUI &kp RCTRL &none &kp H &kp J &kp K &kp L &kp SEMI &kp SQT
+ &kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp HOME &kp PG_UP &kp N &kp M &kp COMMA &kp DOT &kp FSLH &kp RSHFT
+ &mo 2 &kp GRAVE &kp CAPS &kp LEFT &kp RIGHT &kp BSPC &kp DEL &kp END &kp PG_DN &kp ENTER &kp SPACE &kp UP &kp DOWN &kp LBKT &kp RBKT &mo 2
+ >;
+ };
+ keypad {
+ bindings = <
+ &kp EQUAL &kp N1 &kp N2 &kp N3 &kp N4 &kp N5 &trans &mo 3 &kp N6 &kp KP_NUM &kp KP_EQUAL &kp KP_DIVIDE &kp KP_MULTIPLY &kp MINUS
+ &kp TAB &kp Q &kp W &kp E &kp R &kp T &none &none &kp Y &kp KP_N7 &kp KP_N8 &kp KP_N9 &kp KP_MINUS &kp BSLH
+ &kp ESC &kp A &kp S &kp D &kp F &kp G &none &kp LCTRL &kp LALT &kp LGUI &kp RCTRL &none &kp H &kp KP_N4 &kp KP_N5 &kp KP_N6 &kp KP_PLUS &kp SQT
+ &kp LSHFT &kp Z &kp X &kp C &kp V &kp B &kp HOME &kp PG_UP &kp N &kp KP_N1 &kp KP_N2 &kp KP_N3 &kp KP_ENTER &kp RSHFT
+ &mo 2 &kp GRAVE &kp CAPS &kp LEFT &kp RIGHT &kp BSPC &kp DEL &kp END &kp PG_DN &kp ENTER &kp KP_N0 &kp UP &kp DOWN &kp KP_DOT &kp RBKT &mo 2
+ >;
+ };
+ fn {
+ bindings = <
+ &kp F1 &kp F2 &kp F3 &kp F4 &kp F5 &kp F6 &tog 1 &mo 3 &kp F7 &kp F8 &kp F9 &kp F10 &kp F11 &kp F12
+ &trans &trans &trans &trans &trans &trans &none &none &trans &trans &trans &trans &trans &trans
+ &trans &trans &trans &trans &trans &trans &none &trans &trans &trans &trans &none &trans &trans &trans &trans &trans &trans
+ &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
+ &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans &trans
+ >;
+ };
+ mod {
+ bindings = <
+ &none &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4 &none &trans &none &none &none &none &none &none
+ &none &none &none &none &none &none &bootloader &bootloader &none &none &none &none &none &none
+ &none &none &none &none &none &none &none &none &none &bt BT_CLR &none &none &none &none &none &none &none &none
+ &none &none &none &none &none &none &none &none &none &none &none &none &none &none
+ &none &none &none &none &none &none &none &none &none &bl BL_TOG &rgb_ug RGB_TOG &bl BL_INC &bl BL_DEC &none &none &none
+ >;
+ };
+ };
+};
diff --git a/app/boards/arm/adv360pro/adv360pro.yaml b/app/boards/arm/adv360pro/adv360pro.yaml
@@ -0,0 +1,19 @@
+identifier: adv360pro
+name: Advantage 360 Pro
+type: keyboard
+arch: arm
+toolchain:
+ - zephyr
+ - gnuarmemb
+ - xtools
+supported:
+ - gpio
+ - i2c
+ - counter
+ - spi
+ - usb_device
+ - nvs
+ - can
+ - kscan
+ - ble
+ - pwm
diff --git a/app/boards/arm/adv360pro/adv360pro.zmk.yml b/app/boards/arm/adv360pro/adv360pro.zmk.yml
@@ -0,0 +1,16 @@
+file_format: "1"
+id: adv360pro
+name: Advantage 360 Pro
+type: board
+url: https://kinesis-ergo.com/keyboards/advantage360
+arch: arm
+features:
+ - keys
+ - underglow
+ - backlight
+outputs:
+ - usb
+ - ble
+siblings:
+ - adv360pro_left
+ - adv360pro_right
diff --git a/app/boards/arm/adv360pro/adv360pro_left.dts b/app/boards/arm/adv360pro/adv360pro_left.dts
@@ -0,0 +1,36 @@
+/*
+*
+* Copyright (c) 2022 The ZMK Contributors
+* SPDX-License-Identifier: MIT
+*
+*/
+
+#include "adv360pro.dtsi"
+
+/{
+ kscan0: kscan {
+ compatible = "zmk,kscan-gpio-matrix";
+
+ diode-direction = "col2row";
+ row-gpios
+ = <&gpio1 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+ , <&gpio1 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+ , <&gpio0 3 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+ , <&gpio1 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+ , <&gpio1 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
+ ;
+
+ col-gpios
+ = <&gpio0 25 GPIO_ACTIVE_HIGH>
+ , <&gpio0 11 GPIO_ACTIVE_HIGH>
+ , <&gpio0 2 GPIO_ACTIVE_HIGH>
+ , <&gpio0 28 GPIO_ACTIVE_HIGH>
+ , <&gpio0 29 GPIO_ACTIVE_HIGH>
+ , <&gpio0 30 GPIO_ACTIVE_HIGH>
+ , <&gpio0 31 GPIO_ACTIVE_HIGH>
+ , <&gpio1 9 GPIO_ACTIVE_HIGH>
+ , <&gpio0 12 GPIO_ACTIVE_HIGH>
+ , <&gpio0 7 GPIO_ACTIVE_HIGH>
+ ;
+ };
+};
diff --git a/app/boards/arm/adv360pro/adv360pro_left.keymap b/app/boards/arm/adv360pro/adv360pro_left.keymap
@@ -0,0 +1,8 @@
+/*
+*
+* Copyright (c) 2022 The ZMK Contributors
+* SPDX-License-Identifier: MIT
+*
+*/
+
+#include "adv360pro.keymap"