A hardware hack for the MAJORITY Snowdon II Sound bar that adds WiFi capabilities, essentially transforming it into an IoT device.

Full writeup available over on the blog post.

SWDIO and SWCLK are not required for normal operations, they expose the SWD debug pins on the unused USB header for easy access

Please refer to the offical Getting Started guide for full details on getting a build environment setup

Due to the final software containing hardcoded WiFi credentials, it's impossible to share a pre-built uf2. So we must install the Pico SDK and built it from scratch.

Install dependencies for SDK:

sudo apt update
sudo apt install git cmake gcc-arm-none-eabi libnewlib-arm-none-eabi build-essential

Clone SDK;

cd ~/
git clone https://github.com/raspberrypi/pico-sdk.git
cd pico-sdk
git submodule update --init

Export PICO_SDK_PATH variable:

export PICO_SDK_PATH=$HOME/pico-sdk

Clone Snowdon-II-WiFi:

git clone https://github.com/kennedn/snowdon-ii-wifi.git

Create a build directory and configure cmake with WiFi credentials:

cd snowdon-ii-wifi
mkdir build
cd build
# Replace <SSID> and <PASSWORD> with own values
cmake -DPICO_BOARD=pico_w -DWIFI_SSID="<SSID>" -DWIFI_PASSWORD="<PASSWORD>" ..

Compile the program:

cd src
make

If all goes well, a file named snowdon.uf2 should now exist under ~/snowdon-ii-wifi/build/src/.

The Pico can now be plugged in via USB whilst holding down the BOOTSEL button, and the uf2 file dropped in the volume mount.

The RESTful API is exposed on port 8080:

http://<ip_address>:8080

The endpoint expects a single code parameter, which can be sent via either url encoding or in the JSON body of the request, e.g:

curl -X PUT http://192.168.1.238:8080?code=status
# or
curl -X PUT http://192.168.1.238:8080 -H 'Content-Type: application/json' -d '{"code": "power"}'

And this is the full list of available code values:

power_state has the following possible values:

input_state has the following possible values: