Use VPC firewall rules

This page describes the commands for working with Virtual Private Cloud (VPC) firewall rules and offers some examples of how to use them. VPC firewall rules let you allow or deny traffic to or from virtual machine (VM) instances in a VPC network based on port number, tag, or protocol.

Before you begin

To learn more about VPC firewall rules, such as implied rules and system-generated rules for default networks, see VPC firewall rules.

Before configuring firewall rules, review the firewall rule components to become familiar with firewall components as used in Google Cloud.

Create VPC firewall rules

VPC firewall rules are defined at the network level, and only apply to the network where they are created; however, the name you choose for each of them must be unique to the project.

A firewall rule can contain either IPv4 or IPv6 ranges, but not both.

When you create a firewall rule, you can choose to enable Firewall Rules Logging. If you enable logging, you can omit metadata fields to save storage costs. For more information, see Use Firewall Rules Logging.

If you want to specify multiple service accounts for the target or source service account field, use the Google Cloud CLI, the API, or the client libraries.

The default network provides automatic firewall rules at creation time. Custom and auto mode networks allow you to create similar firewalls easily during network creation if you're using the Google Cloud console. If you are using the gcloud CLI or the API and want to create similar firewall rules to those that the default network provides, see Configure firewall rules for common use cases.

Console

  1. In the Google Cloud console, go to the Firewall policies page.

    Go to Firewall policies

  2. Click Create firewall rule.

  3. Enter a Name for the firewall rule.

    This name must be unique for the project.

  4. (Optional) You can enable firewall rules logging:

    • Click Logs > On.
    • To omit metadata, click Show logs details, and then clear the Include metadata checkbox.
  5. Specify the Network for the firewall rule.

  6. Specify the Priority of the rule.

    The lower the number, the higher the priority.

  7. For the Direction of traffic, choose ingress or egress.

  8. For the Action on match, choose allow or deny.

  9. Specify the Targets of the rule.

    • If you want the rule to apply to all instances in the network, choose All instances in the network.
    • If you want the rule to apply to select instances by network (target) tags, choose Specified target tags, and then in the Target tags field, type the tags that the rule should apply to.
    • If you want the rule to apply to select instances by associated service account, choose Specified service account, indicate whether the service account is in the current project or in another one in Service account scope, and then in the Target service account field, choose or type the service account name.
  10. For an ingress rule, specify the Source filter:

    • To filter incoming traffic by source IPv4 ranges, select IPv4 ranges, and then enter the CIDR blocks into the Source IPv4 ranges field. Use 0.0.0.0/0 for any IPv4 source.
    • To filter incoming traffic by source IPv6 ranges, select IPv6 ranges, and then enter the CIDR blocks into the Source IPv6 ranges field. Use ::/0 for any IPv6 source.
    • To filter incoming traffic by network tag, choose Source tags, and then type the network tags into the Source tags field. For the limit on the number of source tags, see Per network limits. Filtering by source tag is only available if the target is not specified by service account. For more information, see filtering by service account versus network tag.
    • To filter incoming traffic by service account, choose Service account, indicate whether the service account is in the current project or in another one in Service account scope, and then choose or type the service account name in the Source service account field. Filtering by source service account is only available if the target is not specified by the network tag. For more information, see filtering by service account versus network tag.
    • Specify a Second source filter if desired. Secondary source filters cannot use the same filter criteria as the primary one. Source IP ranges can be used together with Source tags or Source service account. The effective source set is the union of the source range IP addresses and the instances identified by network tags or service accounts. That is, if either the source IP range, or the source tags (or source service accounts) match the filter criteria, the source is included in the effective source set.
    • Source tags and Source service account can't be used together.
  11. For an ingress rule, specify the Destination filter:

    • To filter incoming traffic by destination IPv4 ranges, select IPv4 ranges and enter the CIDR blocks into the Destination IPv4 ranges field. Use 0.0.0.0/0 for any IPv4 destination.
    • To filter incoming traffic by destination IPv6 ranges, select IPv6 ranges and enter the CIDR blocks into the Destination IPv6 ranges field. Use ::/0 for any IPv6 destination. For more information, see Destination for ingress rules.
  12. For an egress rule, specify the Destination filter:

    • To filter outgoing traffic by destination IPv4 ranges, select IPv4 ranges and enter the CIDR blocks into the Destination IPv4 ranges field. Use 0.0.0.0/0 for any IPv4 destination.
    • To filter outgoing traffic by destination IPv6 ranges, select IPv6 ranges and enter the CIDR blocks into the Destination IPv6 ranges field. Use ::/0 for any IPv6 destination.
  13. For an egress rule, specify the Source filter:

    • To filter outgoing traffic by source IPv4 ranges, select IPv4 ranges and enter the CIDR blocks into the Source IPv4 ranges field. Use 0.0.0.0/0 for any IPv4 source.
    • To filter outgoing traffic by source IPv6 ranges, select IPv6 ranges and enter the CIDR blocks into the Source IPv6 ranges field. Use ::/0 for any IPv6 destination. For more information, see Source for egress rules.
  14. Define the Protocols and ports to which the rule applies:

    • To have the rule apply to all protocols and destination ports, select Allow all or Deny all, depending on the action.
    • To define specific protocols and destination ports, select Specified protocols and ports:

      • Select TCP to include the TCP protocol and destination ports. Enter all or a comma-delimited list of destination ports, such as 20-22, 80, 8080.
      • Select UDP to include the UDP protocol and destination ports. Enter all or a comma-delimited list of destination ports, such as 67-69, 123.
      • Select Other to include protocols such as icmp, sctp, or a protocol number. For example, use icmp or protocol number 1 for IPv4 ICMP. Use protocol number 58 for IPv6 ICMP.

        For more information, see protocols and destination ports.

  15. (Optional) You can create the firewall rule but not enforce it by setting its enforcement state to disabled. Click Disable rule, then select Disabled.

  16. Click Create.

gcloud

To create a VPC firewall rule, use the gcloud compute firewall-rules create command:

gcloud compute firewall-rules create RULE_NAME \
    [--network NETWORK; default="default"] \
    [--priority PRIORITY;default=1000] \
    [--direction (ingress|egress|in|out); default="ingress"] \
    [--action (deny | allow )] \
    [--target-tags TAG[,TAG,...]] \
    [--target-service-accounts=IAM_SERVICE_ACCOUNT[,IAM_SERVICE_ACCOUNT,...]] \
    [--source-ranges CIDR_RANGE[,CIDR_RANGE,...]] \
    [--source-tags TAG,TAG,] \
    [--source-service-accounts=IAM_SERVICE_ACCOUNT[,IAM_SERVICE_ACCOUNT,...]] \
    [--destination-ranges CIDR_RANGE[,CIDR_RANGE,...]] \
    [--rules (PROTOCOL[:PORT[-PORT]],[PROTOCOL[:PORT[-PORT]],...]] | all ) \
    [--disabled | --no-disabled] \
    [--enable-logging | --no-enable-logging] \
    [--logging-metadata LOGGING_METADATA]

Use the parameters as follows. More details about each are available in the SDK reference documentation.

  • --network The network for the rule. If omitted, the rule is created in the default network. If you don't have a default network or want to create the rule in a specific network, you must use this field.
  • --priority A numerical value that indicates the priority for the rule. The lower the number, the higher the priority.
  • --direction The direction of traffic, either ingress or egress.
  • --action The action on match, either allow or deny. Must be used with the --rules flag.
  • Specify a target in one of the following ways:
    • Omit --target-tags and --target-service-accounts if the rule should apply to all targets in the network.
    • Use the --target-tags flag to define targets by network tags.
    • Use the --target-service-accounts flag to define targets by associated service accounts.
  • For the ingress rule, to further refine the destination, use --destination-ranges to specify IPv4 or IPv6 address ranges in CIDR format. If --destination-ranges is omitted, the ingress destination is any IPv4 address, 0.0.0.0/0. For more information, see Destinations for ingress rules and Target and IP addresses for ingress rules.

  • For an ingress rule, specify a source:

    • --source-ranges Use this flag to specify ranges of source IPv4 or IPv6 addresses in CIDR format.
    • If --source-ranges, source-tags, and --source-service-accounts are omitted, the ingress source is any IPv4 address, 0.0.0.0/0.
    • --source-tags Use this flag to specify source instances by network tags. Filtering by source tag is only available if the target is not specified by service account. For more information, see filtering by service account versus network tag.
    • --source-ranges and --source-tags can be used together. If both are specified, the effective source set is the union of the source range IP addresses and the instances identified by network tags, even if the tagged instances do not have IPs in the source ranges.
    • --source-service-accounts Use this flag to specify instances by the service accounts they use. Filtering by source service account is only available if the target is not specified by network tag. For more information, see filtering by service account versus network tag. --source-ranges and --source-service-accounts can be used together. If both are specified, the effective source set is the union of the source range IP addresses and the instances identified by source service accounts, even if the instances identified by source service accounts do not have IPs in the source ranges.
  • For the egress rule, to further refine the source, use --source-ranges to specify IPv4 or IPv6 address ranges in CIDR format. If --source-ranges is omitted, the egress source is any IPv4 address, 0.0.0.0/0. For more information, see Sources for egress rules and Target and IP addresses for egress rules.

  • For an egress rule, specify a destination:

    • --destination-ranges Use this flag to specify ranges of destination IPv4 or IPv6 addresses in CIDR format.
    • If --destination-ranges is omitted, the egress destination is any IPv4 address, 0.0.0.0/0.
  • --rules A list of protocols and destination ports to which the rule applies. Use all to make the rule applicable to all protocols and all destination ports. Requires the --action flag.

  • By default, firewall rules are created and enforced automatically; however, you can change this behavior.

    • If both --disabled and --no-disabled are omitted, the firewall rule is created and enforced.
    • --disabled Add this flag to create the firewall rule but not enforce it. The firewall rule remains disabled until you update the firewall rule to enable it.
    • --no-disabled Add this flag to ensure the firewall rule is enforced.
  • --enable-logging | --no-enable-logging You can enable Firewall Rules Logging for a rule when you create or update it. Firewall Rules Logging allows you audit, verify, and analyze the effects of your firewall rules. See Firewall Rules Logging for details.

    • --logging-metadata If you enable logging, by default, Firewall Rules Logging includes base and metadata fields. You can omit metadata fields to save storage costs. For more information, see Using Firewall Rules Logging.

Terraform

To create a firewall rule, you can use a google_compute_firewall resource.

resource "google_compute_firewall" "rules" {
  name        = "my-firewall-rule"
  network     = "default"
  description = "Creates firewall rule targeting tagged instances"

  allow {
    protocol = "tcp"
    ports    = ["80", "443"]
  }

  source_ranges = ["0.0.0.0/0"]
  target_tags   = ["web"]
}

To learn how to apply or remove a Terraform configuration, see Basic Terraform commands.

API

Create a VPC firewall rule.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls
{
  "name": "RULE_NAME",
  "network": "projects/PROJECT-ID/global/networks/NETWORK",
  ... other fields
}

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • NETWORK: the name of the VPC network where the firewall rule is created.
  • RULE_NAME: the name of the firewall rule.

  • For an ingress firewall rule, specify the ingress source and destination:

    • Use sourceRanges, sourceTags, or sourceServiceAccounts fields to specify the ingress source.

    • sourceRanges can be either IPv4 or IPv6 ranges, but not a combination of both. To use the range 0.0.0.0/0, do not specify any field.

    • You cannot use the sourceTags and sourceServiceAccounts fields together. However, you can use sourceRanges with either sourceTags or sourceServiceAccounts. If you do, the connection just needs to match one or the other for the firewall rule to apply.

    • For the target fields, if you use the sourceTags field, you cannot use the targetServiceAccounts field. You must use the targetTags field or no target field. Similarly, if you use the sourceServiceAccounts field, you cannot use the targetTags field. If you don't specify a target field, the rule applies to all targets in the network.

    • Use the destinationRanges field to specify the ingress destination. destinationRanges can be either IPv4 or IPv6 ranges, but not a combination of both.
      If you don't specify a destination, Google Cloud uses 0.0.0.0/0. For more information, see Destinations for ingress rules and Target and IP addresses for ingress rules.

  • For an egress firewall rule, specify the egress source and destination:

    • Use the sourceRanges field to specify the egress source. sourceRange can be either IPv4 or IPv6 ranges, but not a combination of both.
      If you don't specify a source, Google Cloud uses 0.0.0.0/0. For more information, see Sources for egress rules and Target and IP addresses for egress rules.

    • Use the destinationRanges field to specify the destination. destinationRanges can be either IPv4 or IPv6 ranges, but not a combination of both.
      If you don't specify a destination, Google Cloud uses 0.0.0.0/0. Use the targetTags or targetServiceAccounts field to specify which targets the rule applies to. If you don't specify a target field, the rule applies to all targets in the network.

For more information and descriptions for each field, refer to the firewalls.insert method.

C#


using Google.Cloud.Compute.V1;
using System.Threading.Tasks;

public class CreateFirewallRuleAsyncSample
{
    public async Task CreateFirewallRuleAsync(
        // TODO(developer): Set your own default values for these parameters or pass different values when calling this method.
        string projectId = "your-project-id",
        string firewallRuleName = "my-test-firewall-rule",
        // Name of the network the rule will be applied to. Some available name formats:
        // projects/{project_id}/global/networks/{network}
        // global/networks/{network}
        string networkName = "global/networks/default")
    {
        Firewall firewallRule = new Firewall
        {
            Name = firewallRuleName,
            Network = networkName,
            Direction = ComputeEnumConstants.Firewall.Direction.Ingress,
            Allowed =
            {
                new Allowed
                {
                    Ports = { "80", "443" },
                    IPProtocol = "tcp"
                }
            },
            TargetTags = { "web" },
            Description = "Allows TCP traffic on port 80 and 443 from anywhere."
        };

        // Note that the default value of priority for the firewall API is 1000.
        // If you check the value of firewallRule.Priority at this point it
        // will be equal to 0, however it is not treated as "set" by the library, and thus
        // the default will be applied to the new rule. If you want to create a rule that
        // has priority == 0, you'll need to explicitly set it: firewallRule.Priority = 0.
        // You can use the firewallRule.HasPriority property to check if the priority has been set.
        // You can use the firewallRule.ClearPriority() method to unset the priority.

        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests.
        FirewallsClient client = await FirewallsClient.CreateAsync();

        // Create the firewall rule in the specified project.
        var firewallRuleCreation = await client.InsertAsync(projectId, firewallRule);

        // Wait for the operation to complete using client-side polling.
        await firewallRuleCreation.PollUntilCompletedAsync();
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// createFirewallRule creates a firewall rule allowing for incoming HTTP and HTTPS access from the entire Internet.
func createFirewallRule(w io.Writer, projectID, firewallRuleName, networkName string) error {
	// projectID := "your_project_id"
	// firewallRuleName := "europe-central2-b"
	// networkName := "global/networks/default"

	ctx := context.Background()
	firewallsClient, err := compute.NewFirewallsRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer firewallsClient.Close()

	firewallRule := &computepb.Firewall{
		Allowed: []*computepb.Allowed{
			{
				IPProtocol: proto.String("tcp"),
				Ports:      []string{"80", "443"},
			},
		},
		Direction: proto.String(computepb.Firewall_INGRESS.String()),
		Name:      &firewallRuleName,
		TargetTags: []string{
			"web",
		},
		Network:     &networkName,
		Description: proto.String("Allowing TCP traffic on port 80 and 443 from Internet."),
	}

	// Note that the default value of priority for the firewall API is 1000.
	// If you check the value of `firewallRule.GetPriority()` at this point it
	// will be equal to 0, however it is not treated as "set" by the library and thus
	// the default will be applied to the new rule. If you want to create a rule that
	// has priority == 0, you need to explicitly set it so:

	// firewallRule.Priority = proto.Int32(0)

	req := &computepb.InsertFirewallRequest{
		Project:          projectID,
		FirewallResource: firewallRule,
	}

	op, err := firewallsClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create firewall rule: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Firewall rule created\n")

	return nil
}

Java


import com.google.cloud.compute.v1.Allowed;
import com.google.cloud.compute.v1.Firewall;
import com.google.cloud.compute.v1.Firewall.Direction;
import com.google.cloud.compute.v1.FirewallsClient;
import com.google.cloud.compute.v1.InsertFirewallRequest;
import java.io.IOException;
import java.util.UUID;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateFirewallRule {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample
    /* project: project ID or project number of the Cloud project you want to use.
       firewallRuleName: name of the rule that is created.
       network: name of the network the rule will be applied to. Available name formats:
        * https://www.googleapis.com/compute/v1/projects/{project_id}/global/networks/{network}
        * projects/{project_id}/global/networks/{network}
        * global/networks/{network} */
    String project = "your-project-id";
    String firewallRuleName = "firewall-rule-name-" + UUID.randomUUID();
    String network = "global/networks/default";

    // The rule will be created with default priority of 1000.
    createFirewall(project, firewallRuleName, network);
  }

  // Creates a simple firewall rule allowing for incoming HTTP and 
  // HTTPS access from the entire Internet.
  public static void createFirewall(String project, String firewallRuleName, String network)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    /* Initialize client that will be used to send requests. This client only needs to be created
       once, and can be reused for multiple requests. After completing all of your requests, call
       the `firewallsClient.close()` method on the client to safely
       clean up any remaining background resources. */
    try (FirewallsClient firewallsClient = FirewallsClient.create()) {

      // The below firewall rule is created in the default network.
      Firewall firewallRule = Firewall.newBuilder()
          .setName(firewallRuleName)
          .setDirection(Direction.INGRESS.toString())
          .addAllowed(
              Allowed.newBuilder().addPorts("80").addPorts("443").setIPProtocol("tcp").build())
          .addSourceRanges("0.0.0.0/0")
          .setNetwork(network)
          .addTargetTags("web")
          .setDescription("Allowing TCP traffic on port 80 and 443 from Internet.")
          .build();

      /* Note that the default value of priority for the firewall API is 1000.
         If you check the value of `firewallRule.getPriority()` at this point it
         will be equal to 0, however it is not treated as "set" by the library and thus
         the default will be applied to the new rule. If you want to create a rule that
         has priority == 0, you'll need to explicitly set it so: setPriority(0) */

      InsertFirewallRequest insertFirewallRequest = InsertFirewallRequest.newBuilder()
          .setFirewallResource(firewallRule)
          .setProject(project).build();

      firewallsClient.insertAsync(insertFirewallRequest).get(3, TimeUnit.MINUTES);

      System.out.println("Firewall rule created successfully -> " + firewallRuleName);
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const firewallRuleName = 'YOUR_FIREWALL_RULE_NAME'
// const networkName = 'global/networks/default'

const compute = require('@google-cloud/compute');
const computeProtos = compute.protos.google.cloud.compute.v1;

async function createFirewallRule() {
  const firewallsClient = new compute.FirewallsClient();
  const operationsClient = new compute.GlobalOperationsClient();

  const firewallRule = new computeProtos.Firewall();
  firewallRule.name = firewallRuleName;
  firewallRule.direction = 'INGRESS';
  firewallRule.allowed = [
    {
      IPProtocol: 'tcp',
      ports: ['80', '443'],
    },
  ];
  firewallRule.targetTags = ['web'];
  firewallRule.network = networkName;
  firewallRule.description =
    'Allowing TCP traffic on port 80 and 443 from Internet.';

  // Note that the default value of priority for the firewall API is 1000.
  // If you check the value of `firewallRule.priority` at this point it
  // will be equal to null, however it is not treated as "set" by the library and thus
  // the default will be applied to the new rule. If you want to create a rule that
  // has priority == 0, you need to explicitly set it so:

  // firewallRule.priority = 0

  const [response] = await firewallsClient.insert({
    project: projectId,
    firewallResource: firewallRule,
  });
  let operation = response.latestResponse;

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
    });
  }

  console.log('Firewall rule created');
}

createFirewallRule();

PHP

use Google\Cloud\Compute\V1\Allowed;
use Google\Cloud\Compute\V1\Client\FirewallsClient;
use Google\Cloud\Compute\V1\Enums\Firewall\Direction;

/**
 * To correctly handle string enums in Cloud Compute library
 * use constants defined in the Enums subfolder.
 */
use Google\Cloud\Compute\V1\Firewall;
use Google\Cloud\Compute\V1\InsertFirewallRequest;

/**
 * Creates a simple firewall rule allowing incoming HTTP and HTTPS access from the entire internet.
 *
 * @param string $projectId Project ID or project number of the Cloud project you want to create a rule for.
 * @param string $firewallRuleName Name of the rule that is created.
 * @param string $network Name of the network the rule will be applied to. Available name formats:
 *                        https://www.googleapis.com/compute/v1/projects/{project_id}/global/networks/{network}
 *                        projects/{project_id}/global/networks/{network}
 *                        global/networks/{network}
 *
 * @throws \Google\ApiCore\ApiException if the remote call fails.
 * @throws \Google\ApiCore\ValidationException if local error occurs before remote call.
 */

function create_firewall_rule(string $projectId, string $firewallRuleName, string $network = 'global/networks/default')
{
    $firewallsClient = new FirewallsClient();
    $allowedPorts = (new Allowed())
      ->setIPProtocol('tcp')
      ->setPorts(['80', '443']);
    $firewallResource = (new Firewall())
      ->setName($firewallRuleName)
      ->setDirection(Direction::INGRESS)
      ->setAllowed([$allowedPorts])
      ->setSourceRanges(['0.0.0.0/0'])
      ->setTargetTags(['web'])
      ->setNetwork($network)
      ->setDescription('Allowing TCP traffic on ports 80 and 443 from Internet.');

    /**
    * Note that the default value of priority for the firewall API is 1000.
    * If you check the value of its priority at this point it will be
    * equal to 0, however it is not treated as "set" by the library and thus
    * the default will be applied to the new rule. If you want to create a rule
    * that has priority == 0, you need to explicitly set it so:
    *
    *   $firewallResource->setPriority(0);
    */

    //Create the firewall rule using Firewalls Client.
    $request = (new InsertFirewallRequest())
        ->setFirewallResource($firewallResource)
        ->setProject($projectId);
    $operation = $firewallsClient->insert($request);

    // Wait for the operation to complete.
    $operation->pollUntilComplete();
    if ($operation->operationSucceeded()) {
        printf('Created rule %s.' . PHP_EOL, $firewallRuleName);
    } else {
        $error = $operation->getError();
        printf('Firewall rule creation failed: %s' . PHP_EOL, $error?->getMessage());
    }
}

Python

from __future__ import annotations

import sys
from typing import Any

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_firewall_rule(
    project_id: str, firewall_rule_name: str, network: str = "global/networks/default"
) -> compute_v1.Firewall:
    """
    Creates a simple firewall rule allowing for incoming HTTP and HTTPS access from the entire Internet.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        firewall_rule_name: name of the rule that is created.
        network: name of the network the rule will be applied to. Available name formats:
            * https://www.googleapis.com/compute/v1/projects/{project_id}/global/networks/{network}
            * projects/{project_id}/global/networks/{network}
            * global/networks/{network}

    Returns:
        A Firewall object.
    """
    firewall_rule = compute_v1.Firewall()
    firewall_rule.name = firewall_rule_name
    firewall_rule.direction = "INGRESS"

    allowed_ports = compute_v1.Allowed()
    allowed_ports.I_p_protocol = "tcp"
    allowed_ports.ports = ["80", "443"]

    firewall_rule.allowed = [allowed_ports]
    firewall_rule.source_ranges = ["0.0.0.0/0"]
    firewall_rule.network = network
    firewall_rule.description = "Allowing TCP traffic on port 80 and 443 from Internet."

    firewall_rule.target_tags = ["web"]

    # Note that the default value of priority for the firewall API is 1000.
    # If you check the value of `firewall_rule.priority` at this point it
    # will be equal to 0, however it is not treated as "set" by the library and thus
    # the default will be applied to the new rule. If you want to create a rule that
    # has priority == 0, you need to explicitly set it so:
    # TODO: Uncomment to set the priority to 0
    # firewall_rule.priority = 0

    firewall_client = compute_v1.FirewallsClient()
    operation = firewall_client.insert(
        project=project_id, firewall_resource=firewall_rule
    )

    wait_for_extended_operation(operation, "firewall rule creation")

    return firewall_client.get(project=project_id, firewall=firewall_rule_name)

Ruby


require "google/cloud/compute/v1"

# Creates a simple firewall rule allowing for incoming HTTP and HTTPS access from the entire Internet.
#
# @param [String] project project ID or project number of the Cloud project you want to use.
# @param [String] name: name of the rule that is created.
# @param network: name of the network the rule will be applied to. Available name formats:
#         * https://www.googleapis.com/compute/v1/projects/{project_id}/global/networks/{network}
#         * projects/{project_id}/global/networks/{network}
#         * global/networks/{network}
def create_firewall_rule project:, name:, network: "global/networks/default"
  rule = {
    name: name,
    direction: "INGRESS",
    allowed: [{
      I_p_protocol: "tcp",
      ports: ["80", "443"]
    }],
    source_ranges: ["0.0.0.0/0"],
    network: network,
    description: "Allowing TCP traffic on port 80 and 443 from Internet.",
    target_tags: ["web"]
  }

  # Note that the default value of priority for the firewall API is 1000.
  # If you want to create a rule that has priority == 0, you need to explicitly set it:
  #   rule[:priority] = 0
  # Use `rule.has_key? :priority` to check if the priority has been set.
  # Use `rule.delete :priority` method to unset the priority.

  request = {
    firewall_resource: rule,
    project: project
  }

  client = ::Google::Cloud::Compute::V1::Firewalls::Rest::Client.new
  operation = client.insert request

  wait_until_done operation: operation
end

Update VPC firewall rules

You can modify some components of a VPC firewall rule, such as the specified protocols and destination ports for the match condition. You cannot modify a firewall rule's name, network, the action on match, and the direction of traffic.

If you need to change the name, network, or the action or direction component, you must delete the rule and create a new one instead.

If you want to add or remove multiple service accounts, use the gcloud CLI, the API, or the client libraries. You cannot use the Google Cloud console to specify multiple target service accounts or source service accounts.

Console

  1. In the Google Cloud console, go to the Firewall policies page.

    Go to Firewall policies

  2. Click the firewall rule you want to modify.

  3. Click Edit.

  4. Modify any of the editable components to meet your needs.

  5. Click Save.

gcloud

To update VPC firewall rules, use the gcloud compute firewall-rules update command:

gcloud compute firewall-rules update RULE_NAME \
    [--priority=PRIORITY] \
    [--description=DESCRIPTION] \
    [--target-tags=TAG,...] \
    [--target-service-accounts=IAM_SERVICE_ACCOUNT,_] \
    [--source-ranges=CIDR_RANGE,...] \
    [--source-tags=TAG,...] \
    [--source-service-accounts=IAM_SERVICE_ACCOUNT,_] \
    [--destination-ranges=CIDR_RANGE,...] \
    [--rules=[PROTOCOL[:PORT[-PORT]],…]] \
    [--disabled | --no-disabled] \
    [--enable-logging | --no-enable-logging]

The descriptions for each flag are the same as for creating firewall rules, and more details about each are available in the SDK reference documentation.

API

Use PATCH to update the following fields: allowed, description, sourceRanges, sourceTags, or targetTags. Use PUT or POST for all other fields.

(PATCH|(POST|PUT)) https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls/RULE_NAME
{
  "name": "RULE_NAME",
  "network": "projects/PROJECT-ID/global/networks/NETWORK",
  ... other fields
}

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • NETWORK: the name of the VPC network where the firewall rule is located.
  • RULE_NAME: the name of the firewall rule to update.

For more information and descriptions for each field, refer to the firewalls.patch or firewalls.update method.

C#


using Google.Cloud.Compute.V1;
using System.Threading.Tasks;

public class PatchFirewallRuleAsyncSample
{
    public async Task PatchFirewallRuleAsync(
        // TODO(developer): Set your own default values for these parameters or pass different values when calling this method.
        string projectId = "your-project-id",
        string firewallRuleName = "my-test-firewall-rule",
        int newPriority = 10)
    {
        // The patch operation doesn't require the full definition of a Firewall object.
        // It will only update the values that were set in it,
        // in this case it will only change the priority.
        Firewall firewallRule = new Firewall
        {
            Priority = newPriority
        };

        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests.
        FirewallsClient client = await FirewallsClient.CreateAsync();

        // Patch the firewall rule in the specified project.
        var firewallRulePatching = await client.PatchAsync(projectId, firewallRuleName, firewallRule);

        // Wait for the operation to complete using client-side polling.
        await firewallRulePatching.PollUntilCompletedAsync();
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// patchFirewallPriority modifies the priority of a given firewall rule.
func patchFirewallPriority(w io.Writer, projectID, firewallRuleName string, priority int32) error {
	// projectID := "your_project_id"
	// firewallRuleName := "europe-central2-b"
	// priority := 10

	ctx := context.Background()
	firewallsClient, err := compute.NewFirewallsRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer firewallsClient.Close()

	firewallRule := &computepb.Firewall{
		Priority: proto.Int32(priority),
	}

	req := &computepb.PatchFirewallRequest{
		Project:          projectID,
		Firewall:         firewallRuleName,
		FirewallResource: firewallRule,
	}

	// The patch operation doesn't require the full definition of a Firewall interface. It will only update
	// the values that were set in it, in this case it will only change the priority.
	op, err := firewallsClient.Patch(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to patch firewall rule: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Firewall rule updated\n")

	return nil
}

Java


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.Firewall;
import com.google.cloud.compute.v1.FirewallsClient;
import com.google.cloud.compute.v1.Operation;
import com.google.cloud.compute.v1.PatchFirewallRequest;
import java.io.IOException;
import java.util.UUID;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class PatchFirewallRule {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample
    // project: project ID or project number of the Cloud project you want to use.
    // firewallRuleName: name of the rule you want to modify.
    // priority: the new priority to be set for the rule.
    String project = "your-project-id";
    String firewallRuleName = "firewall-rule-name-" + UUID.randomUUID();
    int priority = 10;

    patchFirewallPriority(project, firewallRuleName, priority);
  }

  // Modifies the priority of a given firewall rule.
  public static void patchFirewallPriority(String project, String firewallRuleName, int priority)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    /* Initialize client that will be used to send requests. This client only needs to be created
       once, and can be reused for multiple requests. After completing all of your requests, call
       the `firewallsClient.close()` method on the client to safely
       clean up any remaining background resources. */
    try (FirewallsClient firewallsClient = FirewallsClient.create()) {

      /* The patch operation doesn't require the full definition of a Firewall object. It will only 
         update the values that were set in it, in this case it will only change the priority. */
      Firewall firewall = Firewall.newBuilder()
          .setPriority(priority).build();

      PatchFirewallRequest patchFirewallRequest = PatchFirewallRequest.newBuilder()
          .setProject(project)
          .setFirewall(firewallRuleName)
          .setFirewallResource(firewall).build();

      OperationFuture<Operation, Operation> operation = firewallsClient.patchAsync(
          patchFirewallRequest);
      operation.get(3, TimeUnit.MINUTES);
      System.out.println("Firewall Patch applied successfully ! ");
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const firewallRuleName = 'FIREWALL_RULE_NAME';
// const priority = 10;

const compute = require('@google-cloud/compute');
const computeProtos = compute.protos.google.cloud.compute.v1;

async function patchFirewallPriority() {
  const firewallsClient = new compute.FirewallsClient();
  const operationsClient = new compute.GlobalOperationsClient();

  const firewallRule = new computeProtos.Firewall();
  firewallRule.priority = priority;

  // The patch operation doesn't require the full definition of a Firewall object. It will only update
  // the values that were set in it, in this case it will only change the priority.
  const [response] = await firewallsClient.patch({
    project: projectId,
    firewall: firewallRuleName,
    firewallResource: firewallRule,
  });
  let operation = response.latestResponse;

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
    });
  }

  console.log('Firewall rule updated');
}

patchFirewallPriority();

PHP

use Google\Cloud\Compute\V1\Client\FirewallsClient;
use Google\Cloud\Compute\V1\Firewall;
use Google\Cloud\Compute\V1\PatchFirewallRequest;

/**
 * Modifies the priority of a given firewall rule.
 *
 * @param string $projectId Project ID or project number of the Cloud project you want to patch a rule from.
 * @param string $firewallRuleName Name of the rule that you want to modify.
 * @param int $priority The new priority to be set for the rule.
 *
 * @throws \Google\ApiCore\ApiException if the remote call fails.
 * @throws \Google\ApiCore\ValidationException if local error occurs before remote call.
 */
function patch_firewall_priority(string $projectId, string $firewallRuleName, int $priority)
{
    $firewallsClient = new FirewallsClient();
    $firewallResource = (new Firewall())->setPriority($priority);

    // The patch operation doesn't require the full definition of a Firewall object. It will only update
    // the values that were set in it, in this case it will only change the priority.
    $request = (new PatchFirewallRequest())
        ->setFirewall($firewallRuleName)
        ->setFirewallResource($firewallResource)
        ->setProject($projectId);
    $operation = $firewallsClient->patch($request);

    // Wait for the operation to complete.
    $operation->pollUntilComplete();
    if ($operation->operationSucceeded()) {
        printf('Patched %s priority to %d.' . PHP_EOL, $firewallRuleName, $priority);
    } else {
        $error = $operation->getError();
        printf('Patching failed: %s' . PHP_EOL, $error?->getMessage());
    }
}

Python

from __future__ import annotations

import sys
from typing import Any

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def patch_firewall_priority(
    project_id: str, firewall_rule_name: str, priority: int
) -> None:
    """
    Modifies the priority of a given firewall rule.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        firewall_rule_name: name of the rule you want to modify.
        priority: the new priority to be set for the rule.
    """
    firewall_rule = compute_v1.Firewall()
    firewall_rule.priority = priority

    # The patch operation doesn't require the full definition of a Firewall object. It will only update
    # the values that were set in it, in this case it will only change the priority.
    firewall_client = compute_v1.FirewallsClient()
    operation = firewall_client.patch(
        project=project_id, firewall=firewall_rule_name, firewall_resource=firewall_rule
    )

    wait_for_extended_operation(operation, "firewall rule patching")

Ruby


require "google/cloud/compute/v1"

# Modifies the priority of a given firewall rule.
#
# @param [String] project project ID or project number of the Cloud project you want to use.
# @param [String] name name of the rule you want to modify.
# @param [Google::Protobuf::RepeatedField] allowed the repeated instances of the Allowed field in the rule.
#         Compute errors out if allowed is empty.
# @param [Integer] priority the new priority to be set for the rule.
def patch_firewall_priority project:, name:, allowed:, priority:
  allowed_arr = allowed.map do |instance|
    {
      I_p_protocol: instance.I_p_protocol,
      ports: instance.ports.to_a
    }
  end.to_a

  rule = {
    priority: priority,
    allowed: allowed_arr
  }

  request = {
    project: project,
    firewall: name,
    firewall_resource: rule
  }

  # The patch operation doesn't require the full definition of a Firewall object. It will only update
  # the values that were set in it, in this case it will only change the priority.
  client = ::Google::Cloud::Compute::V1::Firewalls::Rest::Client.new
  operation = client.patch request

  wait_until_done operation: operation
end

List VPC firewall rules for a VPC network

You can list all of the VPC firewall rules for your project or for a particular VPC network. For each firewall rule, Google Cloud shows details such as the rule's type, targets, and filters.

If you enable Firewall Rules Logging, Firewall Insights can provide insights about your firewall rules to help you better understand and safely optimize their configurations. For example, you can view which allow rules haven't been used in the last six weeks. For more information, see Using the Firewall rules details screen in the Firewall Insights documentation.

Console

To show all the VPC firewall rules for all networks in your project:

To show the VPC firewall rules in a particular network:

  1. In the Google Cloud console, go to the VPC networks page.

    Go to VPC networks

  2. Click the Name of a VPC network to go to its details page.

  3. On the details page for the network, click the Firewalls tab.

  4. Expand vpc-firewall-rules.

gcloud

To produce a sorted list of VPC firewall rules for a given network, use the gcloud compute firewall-rules list commmand:

gcloud compute firewall-rules list --filter network=NETWORK \
    --sort-by priority \
    --format="table(
        name,
        network,
        direction,
        priority,
        sourceRanges.list():label=SRC_RANGES,
        destinationRanges.list():label=DEST_RANGES,
        allowed[].map().firewall_rule().list():label=ALLOW,
        denied[].map().firewall_rule().list():label=DENY,
        sourceTags.list():label=SRC_TAGS,
        targetTags.list():label=TARGET_TAGS
        )"

Replace NETWORK with the name of the network to list firewall rules in.

API

List all VPC firewall rules for a given network.

GET https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls/?filter=network="NETWORK

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • NETWORK: the name of the VPC network that contains the firewall rules to list.

For more information, refer to the firewalls.list method.

C#


using Google.Cloud.Compute.V1;
using System;
using System.Collections.Generic;
using System.Threading.Tasks;

public class ListFirewallRulesAsyncSample
{
    public async Task ListFirewallRulesAsync(
        // TODO(developer): Set your own default values for these parameters or pass different values when calling this method.
        string projectId = "your-project-id")
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests.
        FirewallsClient client = await FirewallsClient.CreateAsync();

        // Make the request to list all firewall rules.
        await foreach (var firewallRule in client.ListAsync(projectId))
        {
            // The result is a Firewall sequence that you can iterate over.
            Console.WriteLine($"Firewal Rule: {firewallRule.Name}");
        }
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/api/iterator"
)

// listFirewallRules prints the list of firewall names and their descriptions in specified project
func listFirewallRules(w io.Writer, projectID string) error {
	// projectID := "your_project_id"

	ctx := context.Background()
	firewallsClient, err := compute.NewFirewallsRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer firewallsClient.Close()

	req := &computepb.ListFirewallsRequest{
		Project: projectID,
	}

	it := firewallsClient.List(ctx, req)
	for {
		firewallRule, err := it.Next()
		if err == iterator.Done {
			break
		}
		if err != nil {
			return err
		}
		fmt.Fprintf(w, "- %s: %s\n", firewallRule.GetName(), firewallRule.GetDescription())
	}

	return nil
}

Java


import com.google.cloud.compute.v1.Firewall;
import com.google.cloud.compute.v1.FirewallsClient;
import com.google.cloud.compute.v1.FirewallsClient.ListPagedResponse;
import java.io.IOException;

public class ListFirewallRules {

  public static void main(String[] args) throws IOException {
    // TODO(developer): Replace these variables before running the sample
    // project: project ID or project number of the Cloud project you want to use.
    String project = "your-project-id";
    listFirewallRules(project);
  }

  // Return a list of all the firewall rules in specified project.
  // Also prints the list of firewall names and their descriptions.
  public static ListPagedResponse listFirewallRules(String project)
      throws IOException {
    /* Initialize client that will be used to send requests. This client only needs to be created
       once, and can be reused for multiple requests. After completing all of your requests, call
       the `firewallsClient.close()` method on the client to safely
       clean up any remaining background resources. */
    try (FirewallsClient firewallsClient = FirewallsClient.create()) {
      ListPagedResponse firewallResponse = firewallsClient.list(project);
      for (Firewall firewall : firewallResponse.iterateAll()) {
        System.out.println(firewall.getName());
      }
      return firewallResponse;
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';

const compute = require('@google-cloud/compute');

async function listFirewallRules() {
  const firewallsClient = new compute.FirewallsClient();

  const [firewallRules] = await firewallsClient.list({
    project: projectId,
  });

  for (const rule of firewallRules) {
    console.log(` - ${rule.name}: ${rule.description}`);
  }
}

listFirewallRules();

PHP

use Google\Cloud\Compute\V1\Client\FirewallsClient;
use Google\Cloud\Compute\V1\ListFirewallsRequest;

/**
 * Return a list of all the firewall rules in specified project. Also prints the
 * list of firewall names and their descriptions.
 *
 * @param string $projectId Project ID or project number of the Cloud project you want to list rules from.
 *
 * @throws \Google\ApiCore\ApiException if the remote call fails.
 */
function list_firewall_rules(string $projectId)
{
    // List all firewall rules defined for the project using Firewalls Client.
    $firewallClient = new FirewallsClient();
    $request = (new ListFirewallsRequest())
        ->setProject($projectId);
    $firewallList = $firewallClient->list($request);

    print('--- Firewall Rules ---' . PHP_EOL);
    foreach ($firewallList->iterateAllElements() as $firewall) {
        printf(' -  %s : %s : %s' . PHP_EOL, $firewall->getName(), $firewall->getDescription(), $firewall->getNetwork());
    }
}

Python

from __future__ import annotations

from collections.abc import Iterable

from google.cloud import compute_v1


def list_firewall_rules(project_id: str) -> Iterable[compute_v1.Firewall]:
    """
    Return a list of all the firewall rules in specified project. Also prints the
    list of firewall names and their descriptions.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.

    Returns:
        A flat list of all firewall rules defined for given project.
    """
    firewall_client = compute_v1.FirewallsClient()
    firewalls_list = firewall_client.list(project=project_id)

    for firewall in firewalls_list:
        print(f" - {firewall.name}: {firewall.description}")

    return firewalls_list

Ruby


require "google/cloud/compute/v1"

# Return a list of all the firewall rules in specified project. Also prints the
# list of firewall names and their descriptions.
#
# @param [String] project project ID or project number of the project you want to use.
# @return [Array<::Google::Cloud::Compute::V1::Firewall>]
#     A list of all firewall rules defined for the given project.
def list_firewall_rules project:
  client = ::Google::Cloud::Compute::V1::Firewalls::Rest::Client.new
  firewalls = client.list project: project

  firewall_list = []
  firewalls.each do |firewall|
    puts " - #{firewall.name}: #{firewall.description}"
    firewall_list << firewall
  end

  firewall_list
end

List VPC firewall rules for a network interface of a VM instance

For each network interface, the Google Cloud console lists all of the VPC firewall rules that apply to the interface and the rules that are actually being used by the interface. Firewall rules can mask other rules, so all of the rules that apply to an interface might not actually be used by the interface.

Firewall rules are associated with and applied to VM instances through a rule's target parameter. By viewing all of the applied rules, you can check whether a particular rule is being applied to an interface.

If you enable Firewall Rules Logging, Firewall Insights can provide insights about your firewall rules to help you better understand and safely optimize their configurations. For example, you can view which rules on an interface were hit in the last six weeks. For more information, see Using the VM network interface details screen in the Firewall Insights documentation.

Console

To view the VPC rules that apply to a specific network interface of a VM instance:

  1. In the Google Cloud console, go to the VM instances page.

    Go to VM instances

  2. Find the instance to view.

  3. In the instance's more actions menu (), select View network details.

  4. If an instance has multiple network interfaces, select the network interface to view in the Selected network interface field.

  5. In the Firewall and routes details section, select the Firewalls tab.

  6. Expand vpc-firewall-rules.

  7. View the table to determine if traffic to or from a specific IP address is permitted.

View VPC firewall rule details

You can inspect a VPC firewall rule to see its name, applicable network, and components, including whether the rule is enabled or disabled.

Console

  1. List your firewall rules. You can view a list of all rules or just those in a particular network.
  2. Click the rule to view.

gcloud

The following command describes an individual VPC firewall rule. Because firewall rule names are unique to the project, you don't have to specify a network when describing an existing firewall rule.

gcloud compute firewall-rules describe RULE_NAME

Replace RULE_NAME with the name of the firewall rule.

API

Describe a given VPC firewall rule.

GET https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls/RULE_NAME

Replace the placeholders with valid values:

  • PROJECT_ID: the ID of the project where the firewall rule is located.
  • RULE_NAME: the name of the firewall rule to describe.

For more information, refer to the firewalls.get method.

Delete VPC firewall rules

Console

  1. List your VPC firewall rules. You can view a list of all rules or just those in a particular network.
  2. Click the rule to delete.
  3. Click Delete.
  4. Click Delete again to confirm.

gcloud

To delete a VPC firewall rule, use the gcloud compute firewall-rules delete command:

gcloud compute firewall-rules delete RULE_NAME

Replace RULE_NAME with the name of the rule to delete.

API

Delete a VPC firewall rule.

DELETE https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls/RULE_NAME

Replace the following:

  • PROJECT_ID: the ID of the project where the firewall rule is located.
  • RULE_NAME: the name of the firewall rule to delete.

For more information, refer to the firewalls.delete method.

C#


using Google.Cloud.Compute.V1;
using System.Threading.Tasks;

public class DeleteFirewallRuleAsyncSample
{
    public async Task DeleteFirewallRuleAsync(
        // TODO(developer): Set your own default values for these parameters or pass different values when calling this method.
        string projectId = "your-project-id",
        string firewallRuleName = "my-test-firewall-rule")
    {

        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests.
        FirewallsClient client = await FirewallsClient.CreateAsync();

        // Make the request to delete the firewall rule.
        var firewallRuleDeletion = await client.DeleteAsync(projectId, firewallRuleName);

        // Wait for the operation to complete using client-side polling.
        await firewallRuleDeletion.PollUntilCompletedAsync();
    }
}

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
)

// deleteFirewallRule deletes a firewall rule from the project.
func deleteFirewallRule(w io.Writer, projectID, firewallRuleName string) error {
	// projectID := "your_project_id"
	// firewallRuleName := "europe-central2-b"

	ctx := context.Background()
	firewallsClient, err := compute.NewFirewallsRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer firewallsClient.Close()

	req := &computepb.DeleteFirewallRequest{
		Project:  projectID,
		Firewall: firewallRuleName,
	}

	op, err := firewallsClient.Delete(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to delete firewall rule: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Firewall rule deleted\n")

	return nil
}

Java


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.FirewallsClient;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.UUID;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class DeleteFirewallRule {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample
    // project: project ID or project number of the Cloud project you want to use.
    // firewallRuleName: name of the firewall rule you want to delete.
    String project = "your-project-id";
    String firewallRuleName = "firewall-rule-name-" + UUID.randomUUID();
    deleteFirewallRule(project, firewallRuleName);
  }


  // Deletes a firewall rule from the project.
  public static void deleteFirewallRule(String project, String firewallRuleName)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    /* Initialize client that will be used to send requests. This client only needs to be created
       once, and can be reused for multiple requests. After completing all of your requests, call
       the `firewallsClient.close()` method on the client to safely
       clean up any remaining background resources. */
    try (FirewallsClient firewallsClient = FirewallsClient.create()) {

      OperationFuture<Operation, Operation> operation = firewallsClient.deleteAsync(project,
          firewallRuleName);
      operation.get(3, TimeUnit.MINUTES);

      System.out.println("Deleted firewall rule -> " + firewallRuleName);
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const firewallRuleName = 'FIREWALL_RULE_NAME';

const compute = require('@google-cloud/compute');

async function deleteFirewallRule() {
  const firewallsClient = new compute.FirewallsClient();
  const operationsClient = new compute.GlobalOperationsClient();

  const [response] = await firewallsClient.delete({
    project: projectId,
    firewall: firewallRuleName,
  });
  let operation = response.latestResponse;

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
    });
  }

  console.log('Firewall rule deleted');
}

deleteFirewallRule();

PHP

use Google\Cloud\Compute\V1\Client\FirewallsClient;
use Google\Cloud\Compute\V1\DeleteFirewallRequest;

/**
 * Delete a firewall rule from the specified project.
 *
 * @param string $projectId Project ID or project number of the Cloud project you want to delete a rule for.
 * @param string $firewallRuleName Name of the rule that is deleted.
 *
 * @throws \Google\ApiCore\ApiException if the remote call fails.
 * @throws \Google\ApiCore\ValidationException if local error occurs before remote call.
 */
function delete_firewall_rule(string $projectId, string $firewallRuleName)
{
    $firewallsClient = new FirewallsClient();

    // Delete the firewall rule using Firewalls Client.
    $request = (new DeleteFirewallRequest())
        ->setFirewall($firewallRuleName)
        ->setProject($projectId);
    $operation = $firewallsClient->delete($request);

    // Wait for the operation to complete.
    $operation->pollUntilComplete();
    if ($operation->operationSucceeded()) {
        printf('Rule %s deleted successfully!' . PHP_EOL, $firewallRuleName);
    } else {
        $error = $operation->getError();
        printf('Failed to delete firewall rule: %s' . PHP_EOL, $error?->getMessage());
    }
}

Python

from __future__ import annotations

import sys
from typing import Any

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def delete_firewall_rule(project_id: str, firewall_rule_name: str) -> None:
    """
    Deletes a firewall rule from the project.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        firewall_rule_name: name of the firewall rule you want to delete.
    """
    firewall_client = compute_v1.FirewallsClient()
    operation = firewall_client.delete(project=project_id, firewall=firewall_rule_name)

    wait_for_extended_operation(operation, "firewall rule deletion")

Ruby


require "google/cloud/compute/v1"

# Deletes a firewall rule from the project.
#
# @param [String] project project ID or project number of the Cloud project you want to use.
# @param [String] name name of the firewall rule you want to delete.
def delete_firewall_rule project:, name:
  client = ::Google::Cloud::Compute::V1::Firewalls::Rest::Client.new
  operation = client.delete project: project, firewall: name

  wait_until_done operation: operation
end

Monitor VPC firewall rules

You can enable logging for VPC firewall rules to see which rule allowed or blocked which traffic. See Use Firewall Rules Logging for instructions.

Configure VPC firewall rules for common use cases

The following sections provide examples of how to use the gcloud CLI and the API to recreate the predefined VPC firewall rules created for default networks. You can use the examples to create similar rules for your custom and auto mode networks. Each firewall rule can include either IPv4 or IPv6 address ranges, but not both.

Allow internal ingress connections between VMs

The following examples create a firewall rule to allow internal TCP, UDP, and ICMP connections to your VM instances, similar to the allow-internal rule for default networks.

gcloud

Use the gcloud compute firewall-rules create command:

gcloud compute firewall-rules create RULE_NAME \
    --action=ALLOW \
    --direction=INGRESS \
    --network=NETWORK \
    --priority=1000 \
    --rules=tcp:0-65535,udp:0-65535,ICMP_PROTOCOL \
    --source-ranges=SUBNET_RANGES

Replace the following:

  • RULE_NAME: the name for this firewall rule.
  • NETWORK: the name of the network this firewall rule applies to. The default value is default.
  • ICMP_PROTOCOL: the ICMP protocol type. Specify ICMPv4 by using the protocol name icmp or protocol number 1. Specify ICMPv6 by using protocol number 58.
  • SUBNET_RANGES: one or more IP address ranges. Including an IP address range means that traffic from that range can reach any VM destination in the VPC network. You can specify either IPv4 or IPv6 ranges in a given firewall rule.

    IPv4 subnet ranges:

    • Auto mode VPC networks use IP address ranges that are within 10.128.0.0/9.
    • Custom mode networks can use any valid IPv4 ranges. If you're not using contiguous ranges for the subnets in your VPC network, you might need to specify multiple ranges.
    • You can use 10.0.0.0/8,172.16.0.0/12,192.168.0.0/16 to allow traffic from all private IPv4 address ranges (RFC 1918 ranges).

    IPv6 subnet ranges:

    • If you have assigned an internal IPv6 address range to your VPC network, you can use that range as a source range. Using the VPC network's internal IPv6 range means that the firewall rule includes all current and future internal IPv6 subnet ranges. You can find the VPC network's internal IPv6 range using the following command:

      gcloud compute networks describe NETWORK \
        --format="flattened(internalIpv6Range)"
      

      You can also specify specific internal IPv6 subnet ranges.

    • To allow traffic from the external IPv6 subnet ranges of dual-stack subnets, you must specify the IPv6 address range of each subnet that you want to include.

API

POST https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls
{
  "kind": "compute#firewall",
  "name": "RULE_NAME",
  "network": "projects/PROJECT_ID/global/networks/NETWORK",
  "direction": "INGRESS",
  "priority": 1000,
  "targetTags": [],
  "allowed": [
    {
      "IPProtocol": "tcp",
      "ports": [
        "0-65535"
      ]
    },
    {
      "IPProtocol": "udp",
      "ports": [
        "0-65535"
      ]
    },
    {
      "IPProtocol": "ICMP_PROTOCOL"
    }
  ],
  "sourceRanges": [
    "SUBNET_RANGES"
  ]
}

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • RULE_NAME: the name of the firewall rule.
  • NETWORK: the name of the VPC network where the firewall rule is created. The default value is default.
  • ICMP_PROTOCOL: the ICMP protocol type. Specify ICMPv4 by using the protocol name icmp or protocol number 1. Specify ICMPv6 by using protocol number 58.
  • INTERNAL_SOURCE_RANGES: one or more IP ranges. To allow internal traffic within all subnets in your VPC networks, specify the IP address ranges that are used in your VPC network. You can specify either IPv4 or IPv6 ranges in a given firewall rule.

    IPv4 subnet ranges:

    • Auto mode VPC networks use IP address ranges that are within 10.128.0.0/9.
    • Custom mode networks can use any valid IPv4 ranges. If you're not using contiguous ranges for the subnets in your VPC network, you might need to specify multiple ranges.
    • You can use 10.0.0.0/8,172.16.0.0/12,192.168.0.0/16 to allow traffic from all private IPv4 address ranges (RFC 1918 ranges).

    IPv6 subnet ranges:

    • If you have assigned an internal IPv6 address range to your VPC network, you can use that range as a source range. Using the VPC network's internal IPv6 range means that the firewall rule includes all current and future internal IPv6 subnet ranges. You can find the VPC network's internal IPv6 range using the following command:

      gcloud compute networks describe NETWORK \
        --format="flattened(internalIpv6Range)"
      

      You can also specify specific internal IPv6 subnet ranges.

    • To allow traffic from the external IPv6 subnet ranges of dual-stack subnets, you must specify the IPv6 address range of each subnet that you want to include.

Allow ingress ssh connections to VMs

The following examples create a firewall rule to allow SSH connections to your VM instances, similar to the allow-ssh rule for default networks.

gcloud

Use the gcloud compute firewall-rules create command:

gcloud compute firewall-rules create RULE_NAME \
    --action=ALLOW \
    --direction=INGRESS \
    --network=NETWORK \
    --priority=1000 \
    --rules=tcp:22 \
    --source-ranges=RANGES_OUTSIDE_VPC_NETWORK

Replace the following:

  • RULE_NAME: the name for this firewall rule.
  • NETWORK: the name of the network this firewall rule applies to. The default value is default.
  • RANGES_OUTSIDE_VPC_NETWORK: one or more IP address ranges. You can specify either IPv4 or IPv6 ranges in a given firewall rule. As a best practice, specify the specific IP address ranges that you need to allow access from, rather than all IPv4 or IPv6 sources.

    • Including 35.235.240.0/20 in the source ranges allows SSH connections using Identity-Aware Proxy (IAP) TCP forwarding if all other prerequisites are met. For more information, see Using IAP for TCP forwarding.
    • Using 0.0.0.0/0 as a source range allows traffic from all IPv4 sources, including sources outside of Google Cloud.
    • Using ::/0 as a source range allows traffic from all IPv6 sources, including sources outside of Google Cloud.

API

POST https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls
{
  "kind": "compute#firewall",
  "name": "RULE_NAME",
  "network": "projects/PROJECT_ID/global/networks/NETWORK",
  "direction": "INGRESS",
  "priority": 1000,
  "targetTags": [],
  "allowed": [
    {
      "IPProtocol": "tcp",
      "ports": [
        "22"
      ]
    }
  ],
  "sourceRanges": [
    "RANGES_OUTSIDE_VPC_NETWORK"
  ]
}

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • RULE_NAME: the name of the firewall rule.
  • NETWORK: the name of the VPC network where the firewall rule is created.
  • RANGES_OUTSIDE_VPC_NETWORK: one or more IP address ranges. You can specify either IPv4 or IPv6 ranges in a given firewall rule. As a best practice, specify the specific IP address ranges that you need to allow access from, rather than all IPv4 or IPv6 sources.

    • Including 35.235.240.0/20 in the source ranges allows SSH connections using Identity-Aware Proxy (IAP) TCP forwarding if all other prerequisites are met. For more information, see Using IAP for TCP forwarding.
    • Using 0.0.0.0/0 as a source range allows traffic from all IPv4 sources, including sources outside of Google Cloud.
    • Using ::/0 as a source range allows traffic from all IPv6 sources, including sources outside of Google Cloud.

Allow ingress RDP connections to VMs

The following examples create a firewall rule to allow Microsoft Remote Desktop Protocol (RDP) connections to your VM instances, similar to the allow-rdp rule for default networks.

gcloud

Use the gcloud compute firewall-rules create command:

gcloud compute firewall-rules create RULE_NAME \
    --action=ALLOW \
    --direction=INGRESS \
    --network=NETWORK \
    --priority=1000 \
    --rules=tcp:3389 \
    --source-ranges=RANGES_OUTSIDE_VPC_NETWORK

Replace the following:

  • RULE_NAME: the name for this firewall rule.
  • NETWORK: the name of the network this firewall rule applies to. The default value is default.
  • RANGES_OUTSIDE_VPC_NETWORK: one or more IP address ranges. You can specify either IPv4 or IPv6 ranges in a given firewall rule. As a best practice, specify the specific IP address ranges that you need to allow access from, rather than all IPv4 or IPv6 sources.

    • Including 35.235.240.0/20 in the source ranges allows RDP connections using Identity-Aware Proxy (IAP) TCP forwarding if all other prerequisites are met. For more information, see Using IAP for TCP forwarding.
    • Using 0.0.0.0/0 as a source range allows traffic from all IPv4 sources, including sources outside of Google Cloud.
    • Using ::/0 as a source range allows traffic from all IPv6 sources, including sources outside of Google Cloud.

API

POST https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls
{
  "kind": "compute#firewall",
  "name": "RULE_NAME",
  "network": "projects/PROJECT_ID/global/networks/NETWORK",
  "direction": "INGRESS",
  "priority": 1000,
  "allowed": [
    {
      "IPProtocol": "tcp",
      "ports": [
        "3389"
      ]
    }
  ],
  "sourceRanges": [
    "EXTERNAL_SOURCE_RANGES"
  ]
}

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • RULE_NAME: the name of the firewall rule.
  • NETWORK: the name of the VPC network where the firewall rule is created.
  • RANGES_OUTSIDE_VPC_NETWORK: one or more IP address ranges. You can specify either IPv4 or IPv6 ranges in a given firewall rule. As a best practice, specify the specific IP address ranges that you need to allow access from, rather than all IPv4 or IPv6 sources.

    • Including 35.235.240.0/20 in the source ranges allows RDP connections using Identity-Aware Proxy (IAP) TCP forwarding if all other prerequisites are met. For more information, see Using IAP for TCP forwarding.
    • Using 0.0.0.0/0 as a source range allows traffic from all IPv4 sources, including sources outside of Google Cloud.
    • Using ::/0 as a source range allows traffic from all IPv6 sources, including sources outside of Google Cloud.

Allow ingress ICMP connections to VMs

The following examples create a firewall rule to allow ICMP connections to your VM instances, similar to the allow-icmp rule for default networks.

gcloud

Use the gcloud compute firewall-rules create command:

gcloud compute firewall-rules create RULE_NAME \
    --action=ALLOW \
    --direction=INGRESS \
    --network=NETWORK \
    --priority=1000 \
    --rules=ICMP_PROTOCOL \
    --source-ranges=RANGES_OUTSIDE_VPC_NETWORK

Replace the following:

  • RULE_NAME: the name of the firewall rule.
  • NETWORK: the name of the network this firewall rule applies to. The default value is default.
  • ICMP_PROTOCOL: the ICMP protocol type. Specify ICMPv4 by using the protocol name icmp or protocol number 1. Specify ICMPv6 by using protocol number 58.
  • RANGES_OUTSIDE_VPC_NETWORK: one or more IP address ranges. You can specify either IPv4 or IPv6 ranges in a given firewall rule. As a best practice, specify the specific IP address ranges that you need to allow access from, rather than all IPv4 or IPv6 sources.

    • Using 0.0.0.0/0 as a source range allows traffic from all IPv4 sources, including sources outside of Google Cloud.
    • Using ::/0 as a source range allows traffic from all IPv6 sources, including sources outside of Google Cloud.

API

POST https://www.googleapis.com/compute/v1/projects/PROJECT_ID/global/firewalls
{
  "kind": "compute#firewall",
  "name": "RULE_NAME",
  "network": "projects/PROJECT_ID/global/networks/NETWORK",
  "direction": "INGRESS",
  "priority": 1000,
  "targetTags": [],
  "allowed": [
    {
      "IPProtocol": "ICMP_PROTOCOL"
    }
  ],
  "sourceRanges": [
    "RANGES_OUTSIDE_VPC_NETWORK"
  ]
}

Replace the following:

  • PROJECT_ID: the ID of the project where the VPC network is located.
  • RULE_NAME: the name of the firewall rule.
  • NETWORK: the name of the VPC network where the firewall rule is created.
  • ICMP_PROTOCOL: the type of ICMP protocol to use. Specify ICMPv4 by using the protocol name icmp or protocol number 1. Specify ICMPv6 by using protocol number 58.
  • RANGES_OUTSIDE_VPC_NETWORK: one or more IP address ranges. You can specify either IPv4 or IPv6 ranges in a given firewall rule. As a best practice, specify the specific IP address ranges that you need to allow access from, rather than all IPv4 or IPv6 sources.

    • Using 0.0.0.0/0 as a source range allows traffic from all IPv4 sources, including sources outside of Google Cloud.
    • Using ::/0 as a source range allows traffic from all IPv6 sources, including sources outside of Google Cloud.

Other configuration examples

Figure 1 describes an example configuration for a VPC network named my-network. The network contains the following:

  • A subnet named subnet1, with IP range 10.240.10.0/24 and a single instance
  • A subnet named subnet2, with IP range 192.168.1.0/24
  • An instance named vm1 in subnet2 with a tag of webserver and internal IP address 192.168.1.2
  • An instance named vm2 in subnet2 with a tag of database and internal IP address 192.168.1.3
This VPC network contains two subnets that each contain
    VMs; subnet2 contains VMs that have network tags assigned to them.
Figure 1. This VPC network contains two subnets that each contain VMs; subnet2 contains VMs that have network tags assigned to them (click to enlarge).

Example 1: Deny all ingress TCP connections except those to port 80 from subnet1

This example creates a set of firewall VPC rules that deny all ingress TCP connections except connections destined to port 80 from subnet1.

gcloud

  1. Create a firewall rule to deny all ingress TCP traffic to instances tagged with webserver.

    gcloud compute firewall-rules create deny-subnet1-webserver-access \
        --network NETWORK_NAME \
        --action deny \
        --direction ingress \
        --rules tcp \
        --source-ranges 0.0.0.0/0 \
        --priority 1000 \
        --target-tags webserver
    

    Replace NETWORK_NAME with the name of the network.

  2. Create a firewall rule to allow all IP addresses in subnet1 (10.240.10.0/24) to access TCP port 80 on instances tagged with webserver.

    gcloud compute firewall-rules create vm1-allow-ingress-tcp-port80-from-subnet1 \
        --network NETWORK_NAME \
        --action allow \
        --direction ingress \
        --rules tcp:80 \
        --source-ranges 10.240.10.0/24 \
        --priority 50 \
        --target-tags webserver
    

    Replace NETWORK_NAME with the name of the network.

Example 2: Deny all egress TCP connections except those to port 80 of vm1

gcloud

  1. Create a firewall rule to deny all egress TCP traffic.

    gcloud compute firewall-rules create deny-all-access \
        --network NETWORK_NAME \
        --action deny \
        --direction egress \
        --rules tcp \
        --destination-ranges 0.0.0.0/0 \
        --priority 1000
    

    Replace NETWORK_NAME with the name of the network.

  2. Create firewall rule to allow TCP traffic destined to vm1 port 80.

    gcloud compute firewall-rules create vm1-allow-egress-tcp-port80-to-vm1 \
        --network NETWORK_NAME \
        --action allow \
        --direction egress \
        --rules tcp:80 \
        --destination-ranges 192.168.1.2/32 \
        --priority 60
    

    Replace NETWORK_NAME with the name of the network.

Example 3: Allow egress TCP connections to port 443 of an external host

Create a firewall rule that allows instances tagged with webserver to send egress TCP traffic to port 443 of a sample external IP address, 192.0.2.5.

gcloud

gcloud compute firewall-rules create vm1-allow-egress-tcp-port443-to-192-0-2-5 \
    --network NETWORK_NAME \
    --action allow \
    --direction egress \
    --rules tcp:443 \
    --destination-ranges 192.0.2.5/32 \
    --priority 70 \
    --target-tags webserver

Replace NETWORK_NAME with the name of the network.

Example 4: Allow SSH connections from vm2 to vm1

Create a firewall rule that allows SSH traffic from instances with the tag database (vm2) to reach instances with tag webserver (vm1).

gcloud

gcloud compute firewall-rules create vm1-allow-ingress-tcp-ssh-from-vm2 \
    --network NETWORK_NAME \
    --action allow \
    --direction ingress \
    --rules tcp:22 \
    --source-tags database \
    --priority 80 \
    --target-tags webserver

Replace NETWORK_NAME with the name of the network.

Example 5: Allow TCP:1443 from webserver to database using service accounts

For additional information on service accounts and roles, see Grant roles to service accounts.

Consider the scenario in figure 2, in which there are two applications that are autoscaled through templates: a webserver application that is associated with a my-sa-webserver service account and a database application that is associated with a my-sa-database service account. A Security admin wants to allow TCP traffic from VMs with the my-sa-webserver service account to destination port 1443 of VMs with the my-sa-database service account.

A firewall rule allows traffic from a VM with the service account
      my-sa-webserver to port 1443 of a VM with the service account
      my-sa-database.
Figure 2. A firewall rule allows traffic from a VM with the service account my-sa-webserver to port 1443 of a VM with the service account my-sa-database (click to enlarge).

The configuration steps, including the creation of the service accounts, are as follows.

gcloud

  1. A project EDITOR or project OWNER creates the service accounts my-sa-webserver and my-sa-database.

    gcloud iam service-accounts create my-sa-webserver \
        --display-name "webserver service account"
    
    gcloud iam service-accounts create my-sa-database \
        --display-name "database service account"
    
  2. A project OWNER assigns the webserver developer [email protected] a serviceAccountUser role for service account my-sa-webserver by setting an Identity and Access Management (IAM) policy.

    gcloud iam service-accounts add-iam-policy-binding \
    [email protected] \
        --member='user:[email protected]' \
        --role='roles/iam.serviceAccountUser'
    
  3. A project OWNER assigns the database developer [email protected] a serviceAccountUser role for service account my-sa-database by setting an IAM policy.

    gcloud iam service-accounts add-iam-policy-binding \
    [email protected] \
        --member='user:[email protected]' \
        --role='roles/iam.serviceAccountUser'
    
  4. Developer [email protected], which has the Instance admin role, creates a webserver instance template and authorizes instances to run as service account my-sa-webserver.

    gcloud compute instance-templates create INSTANCE_TEMPLATE_NAME \
        --service-account [email protected]
    
  5. Developer [email protected], which has the Instance Admin role, creates the database instance template and authorize instances to run as service account my-sa-database.

    gcloud compute instance-templates create INSTANCE_TEMPLATE_NAME \
        --service-account [email protected]
    
  6. The Security admin creates a firewall rule that allows TCP traffic from VMs with the service account my-sa-webserver to reach port 1443 of VMs with the service account my-sa-database.

    gcloud compute firewall-rules create RULE_NAME \
        --network network_a \
        --allow TCP:1443 \
        --source-service-accounts [email protected] \
        --target-service-accounts [email protected]
    

Troubleshooting

Error messages when creating or updating a VPC firewall rule

You might see one of the following error messages:

  • Should not specify destination range for ingress direction.

    Destination ranges are not valid parameters for ingress firewall rules. Firewall rules are assumed to be ingress rules unless a direction of egress is specifically specified. If you create a rule that does not specify a direction, it is created as an ingress rule, which does not allow a destination range. Also, source ranges are not valid parameters for egress rules.

  • Firewall direction cannot be changed once created.

    You cannot change the direction of an existing firewall rule. You have to create a new rule with the correct parameters, then delete the old one.

  • Firewall traffic control action cannot be changed once created.

    You cannot change the action of an existing firewall rule. You have to create a new rule with the correct parameters, then delete the old one.

  • Service accounts must be valid RFC 822 email addresses. The service account specified in firewall rule must be an email address formatted per RFC 822.

    gcloud compute firewall-rules create bad --allow tcp --source-service-accounts invalid-email
    
    Creating firewall...failed.
    ERROR: (gcloud.compute.firewall-rules.create) Could not fetch resource:
    – Invalid value for field 'resource.sourceServiceAccounts[0]': 'invalid-email'. Service accounts must be valid RFC 822 email addresses.
    
  • ServiceAccounts and Tags are mutually exclusive and can't be combined in the same firewall rule. You cannot specify both service accounts and tags in the same rule.

    gcloud compute firewall-rules create bad --allow tcp --source-service-accounts [email protected] --target-tags target
    
    Creating firewall...failed.
     ERROR: (gcloud.compute.firewall-rules.create) Could not fetch resource:
    – ServiceAccounts and Tags are mutually exclusive and can't be combined in the same firewall rule.
    

Resource not found error

When deleting a VPC network or a firewall rule, you might see a message that is similar to the following: The resource "aet-uscentral1-subnet--1-egrfw" was not found.

This error can block you from deleting an implied firewall rule or viewing its details. A firewall rule that is in this state might also block you from deleting a VPC network.

To delete a firewall rule or network that is blocked in this way, first delete the associated Serverless VPC Access connector, and then try again. For more information about how to delete a Serverless VPC Access connector, see delete a connector.

Too many large firewalls error

You might see the following error message: Google Compute Engine: The network contains too many large firewalls.

To maintain safety and performance, there is a limit on the complexity and number of firewall rules that can be implemented in a VPC network. If you see this error, ask your account management team to simplify or consolidate your firewall rules.

Cannot connect to VM instance

If you cannot connect to a VM instance, check your firewall rules.

gcloud

  1. If you are initiating the connection from another VM instance, list the egress firewall rules for that instance.

    gcloud compute firewall-rules list --filter network=NETWORK_NAME \
      --filter EGRESS \
      --sort-by priority \
      --format="table(
          name,
          network,
          direction,
          priority,
          sourceRanges.list():label=SRC_RANGES,
          destinationRanges.list():label=DEST_RANGES,
          allowed[].map().firewall_rule().list():label=ALLOW,
          denied[].map().firewall_rule().list():label=DENY,
          sourceTags.list():label=SRC_TAGS,
          sourceServiceAccounts.list():label=SRC_SVC_ACCT,
          targetTags.list():label=TARGET_TAGS,
          targetServiceAccounts.list():label=TARGET_SVC_ACCT
          )"
    

    Replace NETWORK_NAME with the name of the network.

  2. Check if the destination IP is denied by any egress rules. The rule with the highest priority (lowest priority number) overrides lower priority rules. For two rules with same priority, the deny rule takes precedence.

  3. Check ingress firewall rule for the network that contains the destination VM instance.

    gcloud compute firewall-rules list --filter network=NETWORK_NAME \
      --filter INGRESS \
      --sort-by priority \
      --format="table(
          name,
          network,
          direction,
          priority,
          sourceRanges.list():label=SRC_RANGES,
          destinationRanges.list():label=DEST_RANGES,
          allowed[].map().firewall_rule().list():label=ALLOW,
          denied[].map().firewall_rule().list():label=DENY,
          sourceTags.list():label=SRC_TAGS,
          sourceServiceAccounts.list():label=SRC_SVC_ACCT,
          targetTags.list():label=TARGET_TAGS,
          targetServiceAccounts.list():label=TARGET_SVC_ACCT
          )"
    

    Replace NETWORK_NAME with the name of the network.

    Sample output. Your output will depend on your list of firewall rules.

    NAME                    NETWORK  DIRECTION  PRIORITY  SRC_RANGES    DEST_RANGES  ALLOW                         DENY  SRC_TAGS  SRC_SVC_ACCT      TARGET_TAGS  TARGET_SVC_ACCT
    default-allow-icmp      default  INGRESS    65534     0.0.0.0/0                  icmp
    default-allow-internal  default  INGRESS    65534     10.128.0.0/9               tcp:0-65535,udp:0-65535,icmp
    default-allow-rdp       default  INGRESS    65534     0.0.0.0/0                  tcp:3389
    default-allow-ssh       default  INGRESS    65534     0.0.0.0/0                  tcp:22
    firewall-with-sa        default  INGRESS    1000                                 tcp:10000                                     [email protected]               [email protected]
    
  4. You can also run connectivity tests to/from VM instances in a VPC network to another VPC network or non-Google cloud network to troubleshoot if the traffic is getting dropped by any ingress or egress firewall rules. For more information on how to run the connectivity tests to troubleshoot various scenarios, see Running Connectivity Tests.

Is my VPC firewall rule enabled or disabled?

To see if a firewall rule is enabled or disabled, view the firewall rules details.

In the Google Cloud console, look for Enabled or Disabled in the Enforcement section.

In the gcloud CLI output, look for the disabled field. If it says disabled:false, the rule is enabled and being enforced. If it says disabled: true, the rule is disabled.

Which rule is being applied on a VM instance?

After you create a rule, you can check to see if it's being applied correctly on a particular instance. For more information, see Listing firewall rules for a network interface of a VM instance.

VPC firewall rules with source tags don't take effect immediately

Ingress firewall rules that use source tags can take time to propagate. For details, see the considerations that are related to source tags for ingress firewall rules.

What's next