cdrwtool(1) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | BUGS | AUTHORS | AVAILABILITY | SEE ALSO | COLOPHON

CDRWTOOL(1)              General Commands Manual             CDRWTOOL(1)

NAME         top

       cdrwtool - perform various actions on a CD-R, CD-RW, and DVD-R

SYNOPSIS         top

       cdrwtool -d device -i | -g

       cdrwtool -d device -s [ write-parameters ]

       cdrwtool -d device -q [ write-parameters ]

       cdrwtool -d device -m offset [ write-parameters ]

       cdwrtool -d device -u blocks [ write-parameters ]

       cdrwtool -d device -b b_mode [ write-parameters ]

       cdrwtool -d device -c blocks [ write-parameters ]

       cdwrtool -d device -f filename [ write-parameters ]

       cdwrtool -d device -r track [ write-parameters ]

       cdrwtool -h

DESCRIPTION         top

       The cdwrtool command can perform certain actions on a CD-R, CD-
       RW, or DVD-R device. Mainly these are blanking the media,
       formatting it for use with the packet-cd device,  and applying an
       UDF filesystem.

       The most common usage is probably the `quick setup' option:

              cdrwtool -d device -q

       which will blank the disc, format it as one large track, and
       write the UDF filesystem structures.

       Other options get and set various parameters of how the device is
       set up, and provide for different offsets, modes and settings
       from the defaults.

       The usefulness of most of the options is not explained.

OPTIONS         top

       Main directives:

       -d device
              Specify the device to use. eg. /dev/sr0

       -i     Print disc track info.

       -g     Print write parameters.

       -u length
              Make a UDF filesystem using length number of blocks.

       -q     `Quick setup': blank the disc, format it as one large
              track and write a UDF filesystem.

       -m offset
              Format the disc at offset number of blocks.

       -b mode
              Blank the disk using a mode of `full' or `fast'.

       -f filename
              Write file.

       -c track
              Close track.

       -r track
              Reserve track.

       -z length
              Fixed packet length.

       -s     Set write parameters determined by -l, -w, and -p options
              for the disc.

       -v version
              Specify the udf revision to use. Valid revisions are
              0x0201, 0x0200 and 0x0150.  If omitted, mkudffs udf-
              version is 0x0150.

       -h     Prints a sparse help message.

       Write parameters:

       -t speed
              Set write speed. (Defaults to 12x ?)

       -l type
              Set multi-session field. Either `0' (default), `1', or
              `3', corresponding to `No B0 pointer. Next Session not
              allowed', `B0 pointer = FF:FF:FF. Next session not
              allowed', and `Next session allowed. B0 pointer = next
              possible program area' respectively.

       -w mode
              Set write mode. Either `mode1' or `mode2' (default).

       -p type
              Set packet type. Either `0' or `1' (default),
              corresponding to variable and fixed packet sizes
              respectively.

       -o offset
              Set write offset.

BUGS         top

       Many modern drives refuse on the preparations to format new,
       blanked, or appendable CD-RW media. This causes a message like

              Command failed: 55 ... - sense ...

       The remedy is to use a CD-capable burn program for writing a
       session and closing the medium. For example by using any of
       "cdrecord", "wodim", "cdrskin", or "xorriso -as cdrecord" as
       content of variable prog in:

           prog="xorriso -as cdrecord"
           drive="/dev/sr0"
           dd if=/dev/zero bs=1M count=10 | $prog -v -eject dev="$drive" -

AUTHORS         top

       Jens Axboe <[email protected]>
       Ben Fennema
       Some additions by Richard Atterer <[email protected]>
       BUGS note about closing medium by Thomas Schmitt <[email protected]>

AVAILABILITY         top

       cdrwtool is part of the udftools package and is available from
       https://github.com/pali/udftools/.

SEE ALSO         top

       pktsetup(8), cdrecord(1), wodim(1), cdrskin(1), xorriso(1)

COLOPHON         top

       This page is part of the udftools (Linux tools for UDF
       filesystems and DVD/CD-R(W) drives) project.  Information about
       the project can be found at ⟨https://github.com/pali/udftools⟩.
       If you have a bug report for this manual page, see
       ⟨https://github.com/pali/udftools/issues⟩.  This page was
       obtained from the project's upstream Git repository
       ⟨https://github.com/pali/udftools.git⟩ on 2024-06-14.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2021-12-09.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

Commands                        udftools                     CDRWTOOL(1)

Pages that refer to this page: udfinfo(1)wrudf(1)mkudffs(8)pktsetup(8)udflabel(8)